4-wire measurement technology with separate source (current) and sense path (measurement)
The resistance of the test leads to the device under test is not measured.
Test probe with start button
The current source is only switched on after contacting the device unter test and prevents damage to the surface of the device under test.
Result display in the test probe
For better test comfort, the test person always has the result status in the field of view without direct visual contact with the test device.
Test current monitorin
Drops the test current value under the lower limit current value the device immediately puts out an error due to the constant current monitoring.
Key panel interlock
The key panel interlock prevents incorrect setting of parameters. It can be set up individually. For example all pushbuttons may be locked. Also desired functions can be left unlocked.
Test device for operating “Stand-Alone” or remotely controlled via interface
The test device can be controlled by a Windows software (user interface software DataView), by a self created custom software application (LabView, DLL, C#), simple command parameters (ASCII) or digitally with a PLC (Digital-IO).
Freely programmable sets of parameters
15 freely programmable sets of parameters are available for recalling test parameters.
Signalling: Acoustic, optical and communication interface
Faulty test objects can be reliably identified. Indication lights will also flash additionally.
Individual setup
Start options, language, behaviour of digital IO interface, voltage ramp options, options for connection and cable break monitoring, etc.
Update via interface
For customer specific adaptions and updates.
