PEL 113 is an easy-to-use and portable instrument for energy analysis and energy optimization in order to, among other things, make pre- and post-measurements.
Measures, among other things, current, voltage, energy and all effects on 1- or 3-phase installations.
Perfect for a longer measurement on a plant to see the total energy consumption or the energy produced from a solar cell installation.
With its very wide measurement ranges for both direct and alternating voltage as well as alternating and direct current, the PEL 113 can be used in many electrical installations. All depending on which clamp(s) are connected. Both voltage and current conversion can be set up to 650 kV and 25 kA (10 GW).
Communication
Wi-Fi, Bluetooth, Ethernet, USB and memory card. With the PEL113 connected to Wi-Fi, via network or directly to a PC, both alarms and automatic reports can be created and sent as e-mails. WiFi can either be connected to a network via a server, or directly to a PC or a smartphone. With IRD DataView Synch you are connected to a secure server so that all measurement values are available wherever you are.
Measurement
Stores min, max and average of every second with a sampling rate of 128 measurements per period (20ms) of power and energy consumption in all four quadrants. PEL 113 shows progress down to 200 ms. At the same time, power factor measurement and total and individual harmonic analysis are performed up to the 50th harmonic, all of which are stored in the memory.
Memory
With, for example, a 10-minute period selected with a 1s trend over 30 days, 3.2 GB is used. If 1 s trend is deselected then 0.52 GB is used. The included memory card is 8 GB and the PEL 113 handles cards up to 32 GB.
Software
Delivered with Swedish license-free software and Swedish manual.
For measuring transients and fast processes under 1 ms, we recommend our Qualistar series CA8331, CA8333, CA8336, CA8436 and CA8435.
