Start | Products | EMC – EMI (Emission) | Other Instruments | Tekbox TBL05100-1-B LISN 5µH Line Impedance Stabilisation Network
New
Tekbox TBL05100-1-B LISN 5µH Line Impedance Stabilisation Network Tekbox TBL05100-1-B LISN 5µH Line Impedance Stabilisation Network Tekbox TBL05100-1-B LISN 5µH Line Impedance Stabilisation Network
Images
  • Tekbox TBL05100-1-B LISN 5µH Line Impedance Stabilisation Network
  • Tekbox TBL05100-1-B LISN 5µH Line Impedance Stabilisation Network
  • Tekbox TBL05100-1-B LISN 5µH Line Impedance Stabilisation Network

Tekbox TBL05100-1-B LISN 5µH Line Impedance Stabilisation Network

Art. nr: Tekbox TBL05100-1-B
1 594 EUR
 
Quantity
 
 
 

Product description

The TBL05100-1-B is a universal 5µH LISN that meets the requirements of several standards. The TBL05100 is factory jumpered to 50Ω // 5µH + 1Ω, fulfilling the CISPR 16-1-2 and CISPR 25 impedance, phase an isolation specification. By setting internal jumper, it can be converted into 50Ω // 5µH variants that support standards such as CISPR 25, MIL-STD-461G, ISO11452-4 and ISO 7637-2. By adding an external 10F capacitor, the impedance will fulfil DO-160 specifications. The LISN is inserted into the EUT’s (Equipment Under Test) supply line. Conducted noise at the EUT’s supply terminals can be monitored at the BNC connector with a spectrum analyzer or a measurement receiver. A 5µH inductor decouples the source (supply) terminal from the EUT terminal. The use of two TBL05100-1-B in conjunction with the Tekbox LISN Mate allows for the measurement of common mode and differential mode noise separately. The unit comes equipped with a BNC-male to N-male RG232 cable, mating connectors and ground brackets to attach it to a ground plane.
 
 Specifications:
  • Topology: single path, configurable, 50Ω // 5µH + 1Ω, 50Ω // 5µH; the internal capacitor can be disconnected for
  • ISO 7637-2 and DO-160 set ups; an external 10µF capacitor is required for DO-160; the LISN is
  • factory setup to 50Ω // 5µH + 1Ω, other configurations require setting of an internal high current jumper
  • Supported standards: CISPR 16-1-2, CISPR 25, MIL-STD-461G, DO-160, ISO11452-4 and ISO 7637-2
  • Characterized frequency range: 10 kHz – 400 MHz
  • DC Resistance: < 5 mΩ Source+ to EUT+; < 5 mΩ Source- to EUT-
  • Maximum current: 100A; see plot with heat up characteristics, chapter 8
  • Maximum operating voltage range: 0 – 500V AC @50/60 Hz, 250V AC @ 400Hz, 1000V DC
  • High current plug / screw terminals; male: Phoenix Contact 1762741, female: Phoenix Contact
  • 2 pcs female terminal blocks are supplied as default accessories
  • Jumper: Harwin D3087-98
  • Dimensions: 300 mm x 150 mm x 150 mm Weight: 2.7 kg
 
 

Related products

Tekbox TBL05100-1-10uF External 10uF Capacitor
Tekbox TBL05100-1-10uF External 10uF Capacitor
TBL05100-1-10uF External 10uF Capacitor for TBL05100-1 LISN ...