Start | Products | EMC – EMI (Emission) | Other Instruments | Tekbox TBL5032-3 LISN 50µH Line Impedance Stabilisation Network - CISPR 16
Tekbox TBL5032-3 LISN 50µH Line Impedance Stabilisation Network - CISPR 16Tekbox TBL5032-3 LISN 50µH Line Impedance Stabilisation Network - CISPR 16
Images
  • Tekbox TBL5032-3 LISN 50µH Line Impedance Stabilisation Network - CISPR 16
  • Tekbox TBL5032-3 LISN 50µH Line Impedance Stabilisation Network - CISPR 16

Tekbox TBL5032-3 LISN 50µH Line Impedance Stabilisation Network - CISPR 16

Art. nr: 72356
2 736 EUR
 
Quantity
 
 
 

Product description

The TBL5032-3 is a line impedance stabilization network for measuring line-conducted disturbances in the range 9 kHz to 30 MHz, according to the CISPR 16-1-2 standard. The unit is designed to test 3-phase and single-phase, AC-powered equipment with supply voltages up to a maximum of 450V/260V and 32A. Line noise can be measured on each phase and on the neutral conductor.
 
The TBL5032-3 has separate RF outputs for each phase and neutral and can therefore be connected to the TBLM1 to split the emissions into its common mode and differential mode components. The TBL5032-3 has no built-in high-pass filter at the RF outputs, but instead comes with an external 9 kHz coaxial high-pass filter.
The single-phase DUT socket is available in country-specific variants.
  • Frequency range: 9 kHz to 30 MHz
  • Impedance: 50 Ω ║ (50 µH + 5 Ω)
  • Artificial hand: 220 pF + 511 Ω
  • Switchable PE: 50 Ω ║ 50 µH
  • 250µH pre-filter
  • Separate RF outputs for each line and neutral
  • Inductors with air core
  • Mains voltage: max. 540V/260V / 50 – 60 Hz, CAT ‖
  • Max. current per line and neutral: 32A at 23°C each
  • 3-phase DUT socket: CEE/IEC60309, 3L+N+PE, 32A, female
  • Single phase DUT socket: country specific
  • Power connector: CEE/IEC60309, 3L+N+PE, 32A, male
  • Measuring contacts: 50 Ω BNC
  • External 9 kHz high-pass filter, N-male / N-female
  • Operating temperature range: +5°C … + 40°C; 5% to 80% RH