The TBLPA1 broadband linear power amplifier is a general purpose RF amplifier for test and measurement applications.
It has an output power capacity of up to 1W and can be used in the frequency range from 10 MHz to 1 GHz and with reduced output power even outside.
Specifications:
- Input/output: 50 Ohm, N female
- Supply voltage range: 110 V...240 V
- Power consumption: 15 W
- Operating temperature range: -20°C to 60°C
- Frequency range: 50 MHz - 1 GHz, (3 MHz - 1.3 GHz with reduced output power)
- Gain: 36dB typ., see Table 1 for details
- 1dB output compression point @ 10MHz: +29.5 dBm typ.
- 1dB output compression point @ 100 MHz: +30.9 dBm typ.
- 1dB output compression point @ 500 MHz: +31.3 dBm typ.
- 1dB output compression point @ 1 GHz: +28.7 dBm typ.
- Noise level: 2.5 dB typical.
- 2nd harmonic, 50MHz, Pout=30dBm: < - 50 dBc typ
- 2nd harmonic, 200MHz, Pout=30dBm: < - 40 dBc typ
- 3rd harmonic, 50MHz, Pout=30dBm: < - 30 dBc typ
- 3rd harmonic, 200MHz, Pout=30dBm: < - 25 dBc typ
- Total Harmonic Distortion:
- 0.85% @200MHz, White listening=27dBm typ.
- 1.13% @200MHz, White listening=28dBm typ.
- 2.33% @200MHz, White listening=29dBm typ.
- 5.6% @200MHz, White listening=30dBm typ.
- Third order intersection:
- +50dBm, @200MHz, ∆f = 200kHz typ.
- Input loss:
- 50 MHz: 11dB typ.
- 800 MHz: 16dB typ.
- Output VSWR:
- 50MHz: 2.1:1
- 800MHz: 1.4:1
- Highest rating:
- Maximum input power: +5 dBm
The output of the TBLPA1 is fairly tolerant of output faults, but open or shorted loads are not recommended, potentially causing damage
