The TBPCP2-3070 is an RF pulse current monitoring probe that expands Tekbox's product range of affordable test equipment.
The probe has a very flat response from 30 Hz to 70 MHz and is characterized over the frequency range from 1 Hz to 200 MHz. The TBPCP2-3070 is typically used for surge or RF pulse current monitoring in the time domain, as opposed to RF current monitoring probes designed for EMC applications, which are used for frequency domain measurements.
The aperture of the RF current monitoring probe is 25 mm. Its transmission impedance measured in a 50Ω + 50Ω loop test fixture is -26 dB Ohm with a 3dB bandwidth from 30Hz to 70 MHz.
Specifications:
- Characterized frequency range: 1 Hz to 200 MHz
- 3 dB bandwidth: 30 Hz to 70 MHz (measured in a 50 + 50 Ohm loop)
- Transfer impedance into 50 Ohm load: -26 dB Ohm; 0.05 V/A
- Transfer impedance to high Z: 0.1 V/A
- Probe port impedance: 50 Ohm
- Droop rate: < 20% / ms
- Rise time: < 5 ns
- Max. primary RMS alternating current with respect to internal resistance losses: 40A
- Max. primary single pulse current with respect to internal resistance pulse current values: 200A@ 100ms pulse width; 400A @ 1ms pulse width
- Max. current time product: 0.01 Ampere seconds
- Max. RMS AC current, linear: 4 A
- Max. core temperature: 80 °C
- Aperture diameter: 5.5 mm
- Outer diameter: 27 mm
- Length including SMA connector: 40mm Height: 19mm
- Weight: 60 g
- Connector type: SMA female
