Start | Products | EMC Products | Other Instruments | Tekbox TBL05100-1 LISN 5µH Line Impedance Stabilisation Network - CISPR 16
New
Tekbox TBL05100-1 LISN 5µH Line Impedance Stabilisation Network - CISPR 16Tekbox TBL05100-1 LISN 5µH Line Impedance Stabilisation Network - CISPR 16
Images
  • Tekbox TBL05100-1 LISN 5µH Line Impedance Stabilisation Network - CISPR 16
  • Tekbox TBL05100-1 LISN 5µH Line Impedance Stabilisation Network - CISPR 16

Tekbox TBL05100-1 LISN 5µH Line Impedance Stabilisation Network - CISPR 16

Art. nr: Tekbox TBL05100-1
1 374 EUR
 
Quantity
 
 
 

Product description

The TBL05100-1 is a universal 5µH LISN that meets the requirements of several standards. The TBL05100 is factory wired to 50Ω // 5µH + 1Ω, which meets CISPR 16-1-2 and CISPR 25 impedance, phase one isolation specification. By setting internal jumper it can be converted to 50Ω // 5µH variants supporting standards such as CISPR 25, MIL-STD-461G, ISO11452-4 and ISO 7637-2. By adding an external 10F capacitor, the impedance will meet DO-160 specifications.

The LISN is inserted into the EUT's (Equipment Under Test) supply line. Line noise at the EUT supply terminals can be monitored at the BNC connector with a spectrum analyzer or a measurement receiver. A 5µH inductor disconnects the source (supply) terminal from the EUT terminal.

The use of two TBL05100-1 in combination with Tekbox LISN Mate enables measurement of common mode and differential mode noise separately. The unit is equipped with a BNC male to N male RG232 cable, suitable connectors and ground lugs to secure it to a ground plane.
 
Specifications:
  • Topology: single path, configurable, 50Ω // 5µH + 1Ω, 50Ω // 5µH; the internal capacitor can be disconnected for ISO 7637-2 and DO-160 sets; an external 10µF capacitor is available for the DO-160; LISN is factory set to 50Ω // 5µH + 1Ω, other configurations require setting an internal high current jumper
  • Standards supported: CISPR 16-1-2, CISPR 25, MIL-STD-461G, DO-160, ISO11452-4 and ISO 7637-2
  • Characterized frequency range: 10 kHz – 400 MHz
  • DC resistance: < 5 mΩ Source+ to EUT+; < 5 mΩ Source to EUT
  • Maximum current: 100A; see plot with heating characteristics, chapter 8
  • Nominal operating voltage range: 0 – 250V AC/DC;
  • Components: 350V AC, 50/60 Hz; 1000V DC
  • High current plug/screw terminals; male: Phoenix Contact 1762741, female: Phoenix Contact 1762592; 2 female terminal blocks are included as standard accessories
  • Bridge: Harwin D3087-98
  • Dimensions: 300mm x 150mm x 150mm
  • Weight: 2.7 kg
Applications - EMC carried out noise measurements